Knowledge

What is a complete solar panel system?

I. Composition of solar power system

Solar power generation system consists of solar battery pack, solar controller, storage battery (group). If the output power supply is 220V or 110V and complementary to the utility, it is also necessary to configure the inverter and utility intelligent switcher.

 

1,Solar arrays, i.e. solar panels

This is the core part of the solar photovoltaic power generation system, its main role is to convert solar photons into electricity, thereby promoting the work of the load. Solar cells are divided into monocrystalline silicon too cells, polycrystalline silicon solar cells, amorphous silicon solar cells. Due to the monocrystalline silicon batteries than the other two types of rugged, long service life (generally up to 20 years), photoelectric conversion efficiency and so on, resulting in it becoming the most commonly used batteries.

 

2, solar charge controller

Its main job is to control the state of the entire system, while the battery overcharge, over-discharge to play a protective role. It also has the function of temperature compensation in the place where the temperature is especially low.

 

3,Solar deep cycle battery pack

Battery, as the name suggests, is a power storage, it is mainly stored by the solar panel converted to electrical energy, generally lead-acid batteries, can be recycled many times.

 

In the whole monitoring system. Some devices need to provide 220V, 110V AC power supply, and the direct output of solar energy is generally 1 2VDc, 24VDc, 48VDc. So in order to 22VAC, 11OVAc equipment to provide power, the system must be added to the DC / AC inverter, solar photovoltaic power generation system generated in the DC power into AC power.

 

Second, the principle of solar power generation

The simplest principle of solar power generation is what we call a chemical reaction, i.e., the conversion of solar energy into electricity. This conversion process is the photon of solar radiation energy through the semiconductor material into electrical energy, usually called "photovoltaic effect", solar cells are made using this effect.

 

We know that when the sunlight irradiation to the semiconductor, a part of the photons are reflected off the surface, the rest of the either absorbed by the semiconductor or the semiconductor through, which is absorbed by the photons, of course, some of the heat, the other ~ some of the photons with the semiconductor composition of the valence electrons collision of the atoms, which produces a hole pair of electrons. In this way, the sun's energy in the form of generating electron-hole pairs into electrical energy, and then through the semiconductor's internal electric field reaction, generating a certain current, if a piece of a battery semiconductor connected in various ways to form a multi-stranded current and voltage, and thus the output power.

You Might Also Like

Send Inquiry