News

Solar Power Systems: An Effective Solution To Power Supply Problems

Electricity is an indispensable resource in modern life, and we usually take it for granted that electricity is something that can be obtained anytime and anywhere. However, there are still a large part of people in the world today who live in a world with a lack of electricity or no electricity. They live in poor or remote areas, far from power plants and public grids, and because of the lack of electricity, they cannot enjoy the information and convenience that modern civilization brings to their lives. 


Solar power system can solve their basic electricity problem. Solar power system mainly consists of inverter, solar module, battery and solar controller. After the solar module is connected to the solar controller, the inverter converts the DC power into AC power to meet the user's load first, and then stores the excess power in the battery for use at night and on rainy days. When the battery runs out of power, the inverter can also support the utility or diesel generator as supplementary energy to power the load.


Inverter selection: determine the inverter power according to the size and type of user load.

In addition, if the load contains inductive loads like refrigerators, air conditioners, pumps, range hoods, etc. with motors (the starting power of the motor is 3-5 times of the rated power), the starting power of the load should be taken into account. 5 times), the starting power of the load needs to be taken into account, that is, the starting power of the load should be less than the maximum impact power of the inverter

13



Solar module capacity determination: According to the user's daily electricity consumption and light intensity to determine the capacity of the module

Part of the electricity generated by the solar module during the day to supply the load, the remaining part to charge the battery, at night or in the case of insufficient solar radiation, the electricity stored in the battery will be discharged to the load to use, it can be seen that in the absence of utility power or diesel engine as supplementary energy, the load of the electricity consumed all from In order to ensure the reliable operation of the system, the capacity of the solar panel should be designed to meet the demand even in the worst light season.


solar street light


Battery Capacity Determination: Determine the battery capacity based on nighttime power consumption or backup time

The battery of a solar power system is mainly used for energy storage to ensure that the load can still work normally when the solar radiation is not enough. For solar power systems with important loads, the design of the battery capacity needs to consider the maximum number of cloudy days in the local area. Ordinary solar power system load power supply requirements are not high, considering the system cost reasons, can not consider the number of cloudy and rainy days, as long as the actual light intensity to adjust the use of the load.


solar power


Solar controller selection: based on conversion efficiency or cost


PWM solar controllers have mature technology, simple and reliable circuitry, and are inexpensive, but the utilization rate of the modules is low, with a utilization rate of about 80%. MPPT solar controllers refer to solar controllers with a maximum power point tracking function, with a BUCK buck circuit between the modules and the battery, and a utilization rate of more than 90%.

5

You Might Also Like

Send Inquiry