Is The Production Process Of Smart Common Pole The Same As That Of Ordinary Street Light Pole?
Most of the application scenarios of street lamp poles are outdoors, and there are certain requirements for the material of the lamp pole, which is not only waterproof, anti-corrosion, but also anti-oxidation. Therefore, in the process of making smart street light poles, the street light poles need to be sprayed. Under normal circumstances, the rod body should be sprayed after pickling, hot-dip galvanizing, water washing, phosphating, passivation and other galvanizing works. Hot-dip galvanizing is a key step in the anti-corrosion work of street light poles, usually called hot-dip galvanizing and hot-dip galvanizing.
It is often used in the anti-corrosion work of metal structure facilities in various industries. The rust-removed steel components are immersed in a zinc solution of about 500 ° C, so that the zinc layer is attached to the surface of the steel components to achieve the purpose of anti-corrosion. Plastic spraying is to spray electrostatic powder on the surface of the smart street light pole, so that the plastic powder is adsorbed on the surface of the street light pole, and then the powder is melted and adhered to the surface of the smart street light pole through a high temperature baking process.
So, how to deal with the street lamp pole spray:
Under normal circumstances, the comprehensive common pole is similar to the general street light pole in terms of technology, specifically:
1. After the intelligent street light pole is sprayed, it can effectively reduce wrinkles, sagging, zinc tumor, peeling, spots, yin and yang surface, and the surface is smooth, smooth and beautiful. There are more than 200 colors of plastic powder,
Can be sprayed according to different needs.
2. After the spraying process is completed, a layer of plastic powder protective film is formed on the surface of the No. 3000 light pole on Zhizhi Road. Plastic powder has a certain anti-ultraviolet effect, which can effectively resist oxidative fading caused by sunlight.
3. The thickness of the zinc layer of the street lamp pole is greater than 86um, with strong adhesion and excellent appearance quality. Long-term exposure to sunlight and rain will not rust. It has strong anti-rust and anti-corrosion ability. 3000 smart street light poles use spray
Plastic process, longer service life.
In addition, the production of smart street light poles also needs to go through the following steps: bending and welding, forming and trimming, bottom plate installation, bottom plate welding, trial installation, passivation, grinding repair, edging, drying, etc.
